If you have lived in your home for more than a couple of years, you know that things can go wrong with plumbing. For example, if you have had a new faucet installed in your kitchen, it’s possible that it could get clogged and stop working. Or maybe you need to replace a broken toilet and that will require you to dig up your backyard and replace the old pipe with new PVC.These are some of the common issues that you may encounter with your plumbing system. If any of these sound familiar, don’t worry! We have solutions for every problem listed below. Let’s take a look at the worst plumbing problems you can encounter:

Clogged drains

This is perhaps the most common plumbing problem that you face. We usually see it in kitchens and bathrooms. When a drain gets clogged, it leads to increased pressure in the pipes and can pose a serious health risk. This is why you should always keep an eye on your drains and clean them out at least once a year. You can use a plunger or a snake. If you use a plunger, you should use a bucket to trap the water and prevent it from coming back up the pipes. If you use a snake, you need to be careful not to get it caught in the pipes. That can be dangerous.

Busted or leaking pipes

This is another problem that you can encounter with your plumbing system. Pipes can get damaged, especially if you don’t take care of them properly. In this case, you may need to replace the section of pipe that is broken. You can also try to repair the damage if it is not too severe. It’s important to note that you should never repair a pipe that is leaking. You need to isolate the section of pipe that is leaking water or sewage and fix it properly.

Hot water issues

You may not realize this, but water can get hot or cold in the pipes. This is due to the fact that hot or cold water enters the home through a pipe and then comes out through another pipe. If you have an old water heater, it may not be able to keep the water at the right temperature. In this case, you may need to replace the water heater.If you are facing issues with hot or cold water, it is best to call a plumber. They can diagnose the issue and fix it for you.

No hot water

This is another common plumbing problem that can arise at any time. If your water heater breaks or runs out of fuel (which happens more often than you’d think), it won’t be able to keep the water hot. This will cause you to have to get cold water out of the faucet.If you are dealing with no hot water, you need to get help immediately. You need to let the water run for a minute or two and then shut off the water supply.

Leaking pipes

This is another problem that you can encounter with your plumbing system. Pipes can get damaged, especially if you don’t take care of them properly. In this case, you may need to replace the section of pipe that is broken. You can also try to repair the damage if it is not too severe.It’s important to note that you should never repair a pipe that is leaking. You need to isolate the section of pipe that is leaking water or sewage and fix it properly.

Running Toilet

If you have a running toilet, there is probably something in the toilet that is causing it to back up. This can be a build-up of toilet paper, hair, or even food.If you have a running toilet, you should try to stop the water from coming out of the bowl. You can do this by putting a bucket or a basin under the toilet. Make sure that the water is off before you start flushing the toilet. If you use paper, use a clip to cut down on how much paper you are using.

Dryer Vent Issues

You may have noticed that your dryer has been making strange sounds or not heating up your clothes properly. The problem is that the dryer may be broken. You can try to fix it yourself, but it’s best to call a plumber to come out and take a look.You can also try to shut off the power to the dryer.

Conclusion

These are some of the worst plumbing problems that can arise. Fortunately, there are solutions to all of these problems. If you are dealing with a clogged drain, you can use a plunger or a snake to unclog the pipes. If you are dealing with a broken or leaking pipe, you can replace the section of pipe that is broken or damaged. If you have a busted or leaking water heater, you can replace it. If you have issues with hot or cold water, you need to get a new water heater. If you have a running toilet, you know what the problem is! You just need to find the part that is causing it and fix it.